Re: RE: AD10 - clunks but doesn't always turn on the light ?

["Frank Mc Alinden" <frankmc@xxxxxxxxxxxxxxxx>]

Hi Marcus

Heres a different link ........
http://www.newark.com/product-details/text/catalog/79371.html

As i mentioned in my previous post you should be able to source them from
any major electrical wholesaler .......

> I thought that was what I was doing by using an AD10 :)

You are but using x10 which i assumed would have some delay...whereas if
you
used buttons connected directly to Homevision it would be much
quicker....???

Frank


----- Original Message -----
From: "Marcus Warrington" <marcus.warrington@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Friday, July 07, 2006 9:59 PM
Subject: [ukha_d] RE: AD10 - clunks but doesn't always turn on the light ?


> Frank,
>
> Frank what were the part numbers, your links are specific to the
session
> you Used when you logged onto the website and have expired.
>
>>> Why not turn on non dimmer 240v  stuff with relays ...???
>
> I thought that was what I was doing by using an AD10 :)
>
> Anyway, the biggy for me is that I know nothing about electronics etc
> so building something from scratch is a little daunting for me..
> Especially when it involves mains electricity and the risk of burning
> down the house !
>
> Marcus
>
> -----Original Message-----
> From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf
> Of Frank Mc Alinden
> Sent: 07 July 2006 10:46
> To: ukha_d@xxxxxxx
> Subject: Re: [ukha_d] AD10 - clunks but doesn't always turn on the
light
> ?
>
>
> Hi Marcus
>
>> Since the number of input ports on the HomeVision is limited to
16,
>> which is  less than the number of light switches I have
>
> http://tinyurl.com/kx38a
>
> ;-).........Shameless plug .......
>
> Why not turn on non dimmer 240v  stuff with relays ...???
>
> I use Omron relays to switch some 240v stuff and also use them to
> interface
> between my alarm system to both CBUS and Homevision......What i like
> about
> the omron relays is that the relay contacts are physically  seperated
> from
> the coil (12v dc) ......and you can get them with led indicators to
show
> the
> status of the relay.......heres a link to them ....much cheaper to
> source
> from an electrical wholesaler though........
>
> http://tinyurl.com/zwhzk
>
> and the relay base
>
> http://tinyurl.com/jtsys
>
> I can buy the relay and base here in Oz for around $20.00.....
>
> HTH
> Frank
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>