[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: Jointing CAT5
- Subject: RE: Jointing CAT5
- From: "Keith Doxey" <ukha@xxxxxxxxxxx>
- Date: Wed, 5 Jul 2006 09:26:21 +0100
http://www.minitran.co.uk/pages/products/list.mhtml?ct=1&sc=7
Look for MT50-C5EB Cat5e UTP Transition Point
Keith
> -----Original Message-----
> From: John Benfield [mailto:john.benfield@xxxxxxx]
> Sent: 05 July 2006 07:44
> To: UKHA
> Subject: [ukha_d] Jointing CAT5
>
>
> Hi,
>
> Need some advice about the best way of jointing some CAT5 cable.
> I layed the
> cables some time ago, and I've now moved the location of a pair of
cables
> and naturally the existing cables are to short, so I basically want to
run
> an extension. I've considered either terminating both cables with
> RJ45's and
> putting a connector block between them, or using a punch down block.
Any
> suggestions about which will be best long term? The joint will be in a
> ceiling, so will not be accessable once the plasterboard goes up.
>
> JB
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|