The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Baluns (WAS: RE: touchscreen device recommendations please...)


  • Subject: Re: Baluns (WAS: RE: touchscreen device recommendations please...)
  • From: "Chris Purves" <CHRIS_PURVES@xxxxxxx>
  • Date: Mon, 03 Jul 2006 15:58:19 -0000

You can get them everywhere :)

http://www.cyberselect.co.uk/category/18

have some but not the cheapest source. My cat5 video baluns were =A34 each.

Some cheap some expensive.

You can put pretty much anything over cat5.

Passive baluns are the cheapest, active cost more. The Kat5 system is
a nice active system with extra bells and whistles.

On the speaker cable front - do it if you can - you will not be
dissapointed. Cable is cheap and you don't have to you it in the end.
Sonos proves that but in general wired is easier than wireless
although that sonos controller is very cute :)

Chris



--- In ukha_d@xxxxxxx, "Andy Laurence" <andy@...> wrote:
>
> Christopher Purves <mailto:CHRIS_PURVES@...> wrote:
> > VGA~rj45 baluns ~ 4 * =A380 per pair
>=20
> Where did you get these from?  I'm struggling to get my head round
baluns.  Do they only allow you to run video, or can you get audio
ones?  They seem ideal for getting audio from one room to another
quite cheaply.  I'm leaning towards just running the speaker cable
from Node0 to each room though, at this point!
>=20
> Cheers,
> Andy (overheating)
>








UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.