[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: Harmony 895
- Subject: RE: Harmony 895
- From: "Malcolm Surgenor" <malcolm@xxxxxxxxxxxx>
- Date: Thu, 9 Feb 2006 13:57:02 -0000
equally the Logitech Harmony 895 could control Z-Wave devices outwith
HomeSeer or the ZCU010. As Bill comments it would be fantastic if it could
do away with the ZTH200 remote - I suspect that will still be required to
set up the Z-Wave nodes/devices initially. But there's not enough
information in the 895 documentation though.
Malcolm
Malcolm Surgenor
http://www.surgenor.net
_____
From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf Of
Bill Taylor
Sent: 09 February 2006 10:54
To: ukha_d@xxxxxxx
Subject: Re: [ukha_d] Harmony 895
I use the Zwave ZCU010, purchased from from Lets Automate. It is
supposed to be bi-directional, so it should work.
However, the way you seem to have to set it up is convoluted in the
extreme. It only seems to be able to get data about z-wave modules
from the z-wave remote controller, and you seem to only be
able to set the remote controller to recognise modules if they are
physically present. It is a truly horrible system
[Non-text portions of this message have been removed]
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|