[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: Integrating BT Home Monitor VP1000/Visonic to Homeseer
- Subject: RE: Integrating BT Home Monitor VP1000/Visonic to
Homeseer
- From: "Craig" <craigc.lists@xxxxxxxxxxxxxx>
- Date: Wed, 23 Aug 2006 15:13:36 +0100
> One for Craig - does the Powermax alarm console transmit any
> codes, or is it only the sensors?
Just the sensors (door, PIR, etc)& keyfobs transmit RF. Sensors appear
to
send a 'normal' heatbeat every so often, that includes battery level info.
I did have the alarm panel/console configured to transmit X10 via XM10U so
I
could get alarm state from the panel into homeseer, but did not like the
solution due to the number of devices involved, and latency of X10:
PIR/keyfob -> Panel -> XM10U -> X10 -> CM12 -> Homeseer
The rfxcom solution is now a lot simpler, I get the state of the panel
mirrored in homeseer, from the keyfobs
PIR/keyfob -> Panel
PIR/keyfob -> RFXCOM -> Homeseer
HTH
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|