[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Integrating BT Home Monitor VP1000/Visonic to Homeseer
- Subject: Integrating BT Home Monitor VP1000/Visonic to
Homeseer
- From: "Mark McCall" <lists@xxxxxxxxxxxxxxxxxxx>
- Date: Wed, 23 Aug 2006 13:03:55 +0100
Submission by Craig
This article discusses the RFXCOM Visonic receiver available from
www.rfxcom.com, and how it can easily be used to integrate a Visonic or BT
VP1000 Home Monitor Alarm system with Homeseer. The VP1000 alarm from BT
has
been monitoring my home for sometime. Before purchasing the Alarm I was
sceptical about the range and reliability of the wireless protocol. I found
a good deal on the internet that included extra keyfobs and PIRs, and
thought I would take a risk and give it try. Once the Alarm was installed,
I
was surprised at the reliability and range of the security devices, the
range of the Visonic PIRs is actually better than the existing WiFi
installation...
http://www.automatedhome.co.uk/article1747.html
M.
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|