[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: Require cheap audio cat5 balun
- Subject: RE: Require cheap audio cat5 balun
- From: "Keith Doxey" <ukha@xxxxxxxxxxx>
- Date: Mon, 7 Aug 2006 14:53:48 +0100
Hi Gareth
> I'm after a single channel balun for audio. Basically, to send the
> subwoofer signal from the remote amp.
>
> Any recommends ? I use KAT5 extensively and have some spare KAT5
> tx's, but
> no spare rx's - and thats an expensive route to take just for this.
>
Does your sub have a BALANCED XLR LINE INPUT as well as unbalanced Phono?
If it does then you can use one of your KAT5 Transmitters and connect it
directly to the XLR input of the Sub.
If you use the Left Audio channel it is the BLUE pair.
If you use the Right Audio channel it is the GREEN pair.
XLR Connections
1. Ground - Not used
2. Hot (+ve) - Colour (BLUE/White or GREEN/White)
3. Cold (-ve) - White (WHITE/Blue or WHITE/Green)
Hope that helps
Keith
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|