The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: RE: Random X10 lights on


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Re: Advice on cheap data cabinets and rackmount switches....


  • Subject: Re: Re: Advice on cheap data cabinets and rackmount switches....
  • From: "christopher purves" <CHRIS_PURVES@xxxxxxx>
  • Date: Thu, 20 Oct 2005 18:29:49 +0000

Also you might want to think about noise - get things with either no fans
or
very quiet fans if you are going to be sitting near it. I had a dlink 24
way
hub that made such a racket we had to turn it off.

Chris


>From: Jim Noble <yahoo-groups@xxxxxxx>
>Reply-To: ukha_d@xxxxxxx
>To: ukha_d@xxxxxxx
>Subject: Re: [ukha_d] Re: Advice on cheap data cabinets and rackmount
>switches....
>Date: Thu, 20 Oct 2005 18:03:58 +0100
>
>noel_pilot wrote:
>
> > Hmmm depth,
> > hadn't really thought of that one!
> > Will be putting in a server case, the xcase 4U one that was used
in
> > the Jukebox server build article on this site.
> > Advice anyone on the depth?
>
>
>Get 800mm depth if you can (or more!). 800mm width would be handy for
>cable routing and putting in vertical PDUs (long power strips) etc, but
>less important.
>
>The handles on the front of my EYE-4800 chassis are in contact with the
>glass when the cabinet door is shut, and there's <100mm of space for
>cables behind, which can be a bit on the tight side...
>
>The S411 case is 560mm deep...
>
> > Would you mind explaining the difference between managed and
unmanaged
> > switches?!
>
>
>The latter has lots of fancy traffic shaping features you'll probably
>never use. :-)
>
> > Cabinet will be to house server, switch, a shelf or two for
router,
> > adsl modem and print server, and anything else i can rackmount!!
> > I guess the biggest will be the server pc and the UPS (altho the
UPS
> > is a fair way in the future and I may well have upgraded the
cabinet
> > by then!)
>
>
>How studly is your desk? That lot is going to weight quite a bit -
>especially if the UPS has a decent runtime (ie lots of batteries).
>
>Don't forget to think about cooling and noise. Enclosing everything in
a
>cabinet puts a strain on the internal cooling, and you may well need to
>have a fan tray in the top of the cabinet.
>
>Until recently I had a dual redundant PSU in my server, which has 3
>screaming 40mm fans. I had to swap it for a quietish normal psu as it
>was way too noisy. Mind you, with 2 case fans in the server, the UPS
>fan, a couple of relatively quiet ones in the switch, 4 medium speed
>fans in the fan tray, and 2 high speed fans controlled by a thermostat,
>it still gets a tad noisy in summer :-)
>
>Had to turn the lot off a couple of times, when we had people staying
in
>the spare bedroom next door :-) Looking forward to moving the lot to
the
>garage soon!
>
>Jim
>
>Ps. www.upsman.co.uk for the UPS when you get around to it...
>
>
>
>
>Yahoo! Groups Links
>
>
>
>
>
>
>
>





UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.