Re: Mains Noise - any truth in solutions

["christopher purves" <CHRIS_PURVES@xxxxxxx>]

Hi,

The POTS line comes in to node 0 and is terminated in a BT adsl master
socket (adsl + pots sockets with a front that comes off type). The adsl
socket is used by a linksys wireless router (this was a smoothwall pc based
firewall until 2 days ago) and the POTS socket is not used as .... comfort
is wired into the master socket and a second socket is provided for POTS
which comfort has control over. Into this second socket is plugged 2 sky
digital boxes and a dect master handset base.

2 days ago I thought I had killed the noise as I ....

removed the sky's and pulled out the adsl -- all quiet on the dect. I then
swapped the adsl smoothwall for the linksys and plugged it all back in -
all
quiet. Then last night the noise came back as bad as ever.

I am struggeling to pin it down - could it be the wireless component of the
adsl ? Should I move the dect base into another room ?

Comfort / Earthing ? so many places to look...

I am curently implenting * and so eventually all the sky boxes and dect
will
plug into sipura 2000 ata's and the POTS line and dect base will plug into
a
sipura 3000 (fxo/fxs) - still someway off that project though - configuring
* is a bitch.



Chris





>From: Kevin Hawkins <lists@xxxxxxx>
>Reply-To: ukha_d@xxxxxxx
>To: ukha_d@xxxxxxx
>Subject: Re: [ukha_d] Mains Noise - any truth in solutions
>Date: Wed, 09 Nov 2005 13:48:14 +0000
>
>When you say 'noise' what actually are you experiencing - I know it's
>hard to describe.
>Also what sort of phones/devices do you have connected to the line
& is
>it audible on all the phones ?
>
>     Kevin
>
>christopher purves wrote:
>
> >Hi All,
> >
> >I am getting noise on my POTS phone system which is terminated in
node 0
> >which is due I am sure to the large ammount of electrical
equipment in
> >there.
> >
> >
> >
>
>
>
>
>
>
>Yahoo! Groups Links
>
>
>
>
>
>