[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: Monitoring/Power Cycling PC's with HomeVision
- Subject: RE: Monitoring/Power Cycling PC's with
HomeVision
- From: "Hawes,Timothy Edward \(GEG\)" <haweste@xxxxxxxxxxxxxxx>
- Date: Wed, 11 May 2005 15:46:02 +0100
What about running xAP or xPL on the PC and periodically send an
"ON"
signal. Inside HomeVision you have a countdown timer which is reset by
the xAP/xPL message. If the xAP/xPL message is not received then the
countdown timer times-out and HV sends a reboot signal via X10.
Would that work?
HTH,
Tim.
> -----Original Message-----
> From: Graham Kiff
>
> Guys
>
> I would like to monitor PC's status using something like
> PING, however if the PC hangs and no ping response is
> received I want to use HomeVision to send the appropriate X10
> commands to cycle the power to the PC.
> Has anyone implemented such a scenario, if so how have they done it.
>
> TIA
> Graham
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|