The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: MX-3000 Remote Review...


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

RE: 19" rack size ?



Ah, that sounds like a good method ! Thanks Keith !

Now to track down a new door :D

Thanks

Marc

________________________________

From: ukha_d@xxxxxxx on behalf of Keith Doxey
Sent: Fri 29/04/2005 22:38
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] 19" rack size ?



> -----Original Message-----
> From: Marc Fuller [mailto:marc@xxxxxxx]
>
> The second question, how does one work out the size in U that the rack
is
?
>

OLD WAY - Measure the height in INCHES and divide by 1.75 as a
"U" is (was)
An inch and three quarters.

NEW WAY - Measure the height in Millimetres and divide by 44.5 as 1U is 45
mm but 2U is 89mm and 3U is 133mm.

Note the millimetre spacing is irregular which is why its a "19 INCH
RACK"
and not a "482.6mm RACK"  :-)

BTW. Just measure the rack mounting height NOT the whole rack including
base
and top etc

Regards

Keith






UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.