[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: Node 0...But what about the surround sound amp?!!
- Subject: RE: Node 0...But what about the surround sound
amp?!!
- From: "Rob Mouser" <rob@xxxxxxxxxxxx>
- Date: Sun, 1 May 2005 18:06:49 +0100
Hi Noel
I do exactly that and have 6.1 in the lounge fed from an amp in my Node 0.
I
don't suffer any lip synch issues (Other than Sky+, but that's nothing to
do
with cable lengths!). You can see my Node 0 here:
http://www.automatedhome.co.uk/contentid-8.html
(Rob Mouser)
If you move your surround amp to the local zone you're then left with the
messy issue of piping the sources from Node 0 to those zones which would be
expensive and hard work.
HTH
Rob
-----Original Message-----
From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf Of
noel_pilot
Sent: 01 May 2005 17:51
To: ukha_d@xxxxxxx
Subject: [ukha_d] Node 0...But what about the surround sound amp?!!
HI all,
First post...be gentle please!
Am planning my forthcoming Node 0 and whole house setup but one
questions keeps coming back to me,
If I have all my sources, PC, Tivo etc etc in the attic or under
stairs whatever, I want stereo sound in bathroom, kitchen etc, but
full surround in Lounge and bedroom. So do I have surround amps in
Node 0 and run the speaker cables all the way back there...(In which
case Im thinking theres gonna be a hell of a lip sync delay) or do I
take the hit and have just the one box on location in each room?
Look forward to your recommendations on this one.
Thanks
Noel
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|