[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: Powering a remote wake up switch from automation PC
- Subject: RE: Powering a remote wake up switch from automation
PC
- From: "Hawes,Timothy Edward \(GEG\)" <haweste@xxxxxxxxxxxxxxx>
- Date: Fri, 8 Jul 2005 07:11:40 +0100
Just another thought - are your router and automation PC located close
together? If so, tap off the routers power supply, and since that has to
be running to be able to wake up the PC you're not really using any more
juice than powering direct from the PC.
HTH,
Tim.
> -----Original Message-----
> From: Phil Harris
>
> If you're looking for a 5v permanent feed then you should
> have one on the power connector to the motherboard *OR* you
> can probably pick one up from the WOL connector.
>
> Phil
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|