RE: Troubleshooting X10 interference

["Paul Gale" <groups@xxxxxxxxxxxxxxxx>]

No RF devices at all - only LD11 and AD10's

Paul.



-----Original Message-----
From: Mal Lansell [mailto:mlansell@xxxxxxx]
Sent: 27 January 2005 12:42
To: ukha_d@xxxxxxx
Subject: Re: [ukha_d] Troubleshooting X10 interference


Do you have any RF X10 devices?

----- Original Message -----
From: "Paul Gale" <groups@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Thursday, January 27, 2005 12:29 PM
Subject: RE: [ukha_d] Troubleshooting X10 interference


>
> Anyone?
>
> Help!  ;)
>
> Paul.
>
> -----Original Message-----
> From: Paul Gale [mailto:groups@xxxxxxx]
> Sent: 27 January 2005 08:12
> To: ukha_d@xxxxxxx
> Subject: [ukha_d] Troubleshooting X10 interference
>
>
> I've been suffering from various lights turning on/off but mainly
> dimming over the last couple of months. All lights in the house are
> controlled by approx 40 LD11's. They've been running with few problems
> for over 2 years now. It's only recently that the problem has started
> (so I think I can rule out cable run problems?
>
> I fitted a 250A filter on the incoming supply last week so would hope
> this is filtering any stray signals from the neighbours (not that I've
> found any yet using X10). The problem still occurs :(
>
> I have an XM10 connected to HomeVision Pro via a length of Cat5
(approx
> 15m) which runs from Node0 to the enclosures which house the LD11's.
>
> I've not totally ruled out rogue programming in HV yet although some
of
> the lights that come on have never been automated. A check here will
be
> the next step.
>
> Oddly, most of the unwanted on/off/dim's seem to occur in the evening.
> It's rare that they happen in the middle of the night or in the day
> (although this may be down just to not noticing).
>
> Any recommendations as to a troubleshooting procedure?
>
> Thanks,
>
> Paul.
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>