The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

RE: Multiple Wireless AP working together?


  • Subject: RE: Multiple Wireless AP working together?
  • From: "Yahoo Lists" <ukha@xxxxxxxxxxxx>
  • Date: Mon, 24 Jan 2005 16:07:18 -0000


The latest version of ICA (MPS V3) would allow you to roam between
access points in the way you describe below as long as the ICA server is
local and not connected via a Secure Gateway.

Rob

-----Original Message-----
From: lists@xxxxxxx [mailto:lists@xxxxxxx]
Posted At: 24 January 2005 15:49
Posted To: Yahoo Lists
Conversation: [ukha_d] Multiple Wireless AP working together?
Subject: RE: [ukha_d] Multiple Wireless AP working together?


>So, if I have (lets say) a ground floor AP and a 1st floor AP how do I
set
>them up so a can "roam" about with an iPAQ for example,
walking in and
out
>of coverage from each device?

Set them up on the same channel, same sid, but dont configure WDS.

If you have a DHCP server on your wired LAN, then this should be used to
assign the client IP addresses, not the AP's, as you cant have them
dishing
out the same ranges, and you dont want your clients to keep getting new
IP
addresses.

Im pretty sure if you are using something session based (such as RDP or
ICA) then you wont be able to seamlessly roam between APs without using
some of the more advanced routing firmwares.

Cheers,


/Neil/
www.spellings.net






UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.