[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: Adjustable hole cutter
- Subject: Re: Adjustable hole cutter
- From: "Davey" <DB1001@xxxxxxxxxxxxxxx>
- Date: Wed, 19 Jan 2005 16:43:50 -0000
- References:
<0277f0324141315RIKKY@mail-a.exchange.uk.com>
Bought something similar for cutting holes in PB ceiling for halogen
downlighters. Mine onlt had a single blade and a counterweight on the other
end. Worked fine for PB and fast.
Assuming PB ceiling - Just be a little careful when using it when you are
getting close to breaking through. As I used it on a electric drill -
rather
than my battery one and the leccy one didn't have a clutch.. the circular
cutout of PB did snag on one occasion .. which tore the drill out of my
hand. This wouldn't of been an issue with a clutched battery drill/driver
HTH
davey
----- Original Message -----
From: "John Benfield" <yahoo@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Wednesday, January 19, 2005 2:20 PM
Subject: [ukha_d] Adjustable hole cutter
>
> Does anyone has experience of an adjustable hole cutter such as this
> http://tinyurl.com/4h94n. I
need to know how good/accurate it is at
cutting
> big holes - it's a bit expensive to buy on whim.
>
> JB
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|