[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: Re: Logging HV received X10 signals
- Subject: RE: Re: Logging HV received X10 signals
- From: "Paul Gale" <groups@xxxxxxxxxxxxxxxx>
- Date: Mon, 17 Jan 2005 15:13:41 -0000
Thanks Mark, I'll look into that. I presume it will log ALL X10 including
that sent by HV?
Will it write into an Access DB?
Thanks,
Paul.
-----Original Message-----
From: mark_harrison_uk2 [mailto:mph@xxxxxxx]
Sent: 17 January 2005 10:55
To: ukha_d@xxxxxxx
Subject: [ukha_d] Re: Logging HV received X10 signals
--- In ukha_d@xxxxxxx, "Paul Gale" <groups@s...> wrote:
> I posted this on the HV group:
> Hi,
> What's the best way to report on X10 signals RECEIVED i.e. not sent
by HV?
> I'm having some problems with a few lights and I'm not sure whether
it's a neighbour using X10 or some weird interference/fault somewhere.
If I can log the received only signals, I may be able to find some
pattern.
> Oh, and I use ACE as well if that helps?
> Thanks,
> Paul.
Paul,
How I'd do it (may be overkill, but as ever the tools I'm familiar
with are the quickest to deploy.)
1: Set up the Homevision xAP connector, which will take all the X10
messages incoming, and send them as xAP messages.
2: Set up the xAP Database logger, which will take all the xAP
messages and log them to a database.
Both are available for download from www.ascentium.co.uk\xap
Of course, this rather hinges on you having a database hanging about.
I use MySQL, which is very straightforward to download and set up.
Hope this helps.
Regards,
Mark
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|