The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

RE: 1 Wire Mounting options


  • Subject: RE: 1 Wire Mounting options
  • From: "Rodney Hall" <rmh@xxxxxxxxxx>
  • Date: Sun, 16 Jan 2005 16:57:03 -0000


>
> What height do you intend to mount these in your rooms ?
>
> I have run a long term comparison between a 1 wire
> temperature sensor at about 1.5M and another directly above
> at about 2.4M. The room is not heated at the moment, it is a
> basement room which will eventually have UFH. Both probes
> read the same temperature with the door closed and no heat
> source, this is somewhere between 8 and 10 degrees C. However
> if I vent my Node 0 into the room with air temperature
> between 20 and 25 degrees C then the temperature of the probe
> at 1.5m is pretty stable but the probe mounted higher is
> affected by the in rush of warmer air (at that height?).
>
> This variation may be able to be compensated for in S/W
> although it is not linear and does depend on air movement
> more than the absolute temperature. The question really is
> which more closely reflects the feeling of comfort perceived
> by a human...
>
> I had hoped to place the sensors high in the room but I am
> concerned that this will not manage the temperature where we,
> as humans, want it between 1 and 2 metres from the floor.
>
> Nigel

Standard practise in heating is to mount thermostats/sensors at around
1.5m.
I always say eye level.

--
Rodney Hall
Dum spiro spero
While I breathe, I hope
~~~~~~~~~~~~~
rmh@xxxxxxx
http://rmhh.co.uk/
http://rmhh.org.uk/
~~~~~~~~~~~~~~





UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.