The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Clipsal rethink





Back on again regarding Clipsal...it's a bit of a saga but it's quite a=20
bit of dosh, so I'd appreciate any thoughts.

The idea was to use momentary Clipsal switches for 4 zones and a PIR=20
for the 4th zone.
My shopping list was

1x	L5504D2A	Four channel dimmer with power supply
1x	5751L		PIR sensor
1x	5104AUX		Four channel Auxiliary Input Module (NOT the 5104BCL bus=20
coupler)
1x	5500PC		PC interface

The total uk sourced cost for this is =A3800 + VAT

Then someone from Iceland posted with the link for=20
http://www.cbussales.com

My new shopping list could be

1x	L5504D2A	Four channel dimmer with power supply
1x	5751L		PIR sensor
3x	EA5082NL	Neo switch
1x	5055DL		Neo DLT
1x	5500CN		Ethernet interface

The total cost for this is =A3690 + delivery + import duty + VAT

This is a bit more expensive, but advantage is I get ethernet interface=20
instead of RS232.
This claims to do everything the RS232 interface does and more...is=20
this the case ?

Also use intelligent switches instead of momentary including in one=20
area the DLT switch which looks very programmable.
Here's the DLT switch, has anyone used one?

http://www.cbussales.com/product_info.php?products_id=3D145

Thanks,

Martin




UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.