[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: Fw: 6-Way cat5 face plate
Hi Keith
The Clipsal rj45,s (with shutters) are listed around 12 quid on
the Lets Automate site
Frank
----- Original Message -----
From: "Keith Doxey" <ukha@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Wednesday, October 20, 2004 6:05 PM
Subject: Re: Fw: [ukha_d] 6-Way cat5 face plate
--- In ukha_d@xxxxxxx, Gareth Cook <g@u...> wrote:
> I've used these - you'll then get 8 on a double gang. And they're
cheap !
> About £7 for a 4 way.
>
They are what I use but the original quastion was for 6 on a Double
Gang plate. The Mini5 ones from Rapid will give you 8 on TWO Single
Gang plates. Not the same thing, especially if you already have the
box in the wall.
Just out of interest, where did the £65 price come from?
I havent bought much Clipsal stuff (and havent got any Clipsal
RJ45's) but when I bought some bits from CEF I didnt think they were
too expensive.
Keith
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|