Fw: Status LED for Comfort ?

[Gareth Cook <g@xxxxxxxxxx>]

Paul

You got any details on this PSU ? I've ordered the lock already :-)

G.

Gareth Cook
SWG EMEA North Account Manager
IBM SWG - BTE Office - Lotus Park, Staines, TW18 3AG
Office: +44 (0)1784 445166 - Mobile: +44 (0)7980 445166
AIM Chat : TheBoyG - MSN Chat : chat@xxxxxxx
email: g@xxxxxxx


----- Forwarded by Gareth Cook/UK/IBM on 19/10/2004 17:17 -----

Discussion
Main Topic

"Paul Gale" <groups@xxxxxxx>
Today 17:01

.
Subject:
.
RE: [ukha_d] Status LED for Comfort ?
.
Category:




I would think that the door locks are going to be too much for Comfort - I
have a couple but they're powered by separate PSU's rated at about 1A
each. Comfort simply switches the trigger in the PSU. The PSU's are
specifically designed for the door locks and have a battery backup
facility if needed (although I don't use this as my locks are fail-locked
and have a high security manual key override).

Paul.



> -----Original Message-----
> From: Gareth Cook [mailto:g@xxxxxxx]
> Sent: 19 October 2004 16:44
> To: ukha_d@xxxxxxx
> Subject: Fw: [ukha_d] Status LED for Comfort ?
>
>
> Hmmm
>
> Wonder if 4 x Magnetic Door locks and these LED's would be greater
than
> Comfort can handle ?! Once you get into relays - Im totally lost !
>
> G.
>
>  Gareth Cook
>  SWG EMEA North Account Manager
>  IBM SWG - BTE Office - Lotus Park, Staines, TW18 3AG
>  Office: +44 (0)1784 445166 - Mobile: +44 (0)7980 445166
>  AIM Chat : TheBoyG - MSN Chat : chat@xxxxxxx
>  email: g@xxxxxxx
>
>
> ----- Forwarded by Gareth Cook/UK/IBM on 19/10/2004 16:26 -----
>
> Discussion
> Main Topic
>
> Jim Noble <yahoo-groups@xxxxxxx>
> Today 15:58
>
> .
> Subject:
> .
> Re: [ukha_d] Status LED for Comfort ?
> .
> Category:
>
>
>
>
> Gareth Cook wrote:
>
> > I'm after an LED that I can use for 2 different purposes.
> > I want to use one mounted on the door magnetic sensors - so when
Comfort
> > is in night mode for example, it lights the led up (say a red
one).
I've
> > got 8 core cable going to the magnetic contacts so there are 6
spare.
> > Secondly, Im going to have a magnetic door lock on some internal
doors
-
> > im going to use comfort to control those via the output (12v) -
I'd
like
> > to use an LED to be on when the door is locked - another use of
the
> > Comfort output.
> > So, anyone recommend a small red led that takes 12v I can plug
into a
> > spare Comfort output ? I am not an electronics bod by any
standard !
> (but
> > I can do basic electrics!)
>
>
> Maplin, RS etc have LEDs with a built in resistor for 12V operation.
>
> Eg. RS part 355-6736.
>
> Or you could use a 12V relay, and provide the LED with some other
> voltage/resistor combo. The latter may be required if the total of all
> the LEDs exceeds the rated current output of comfort (no idea what
that
> is! LEDs don't take much though).
>
> Jim
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>