[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: Status LED for Comfort ?
Gareth Cook wrote:
> I'm after an LED that I can use for 2 different purposes.
> I want to use one mounted on the door magnetic sensors - so when
Comfort
> is in night mode for example, it lights the led up (say a red one).
I've
> got 8 core cable going to the magnetic contacts so there are 6 spare.
> Secondly, Im going to have a magnetic door lock on some internal doors
-
> im going to use comfort to control those via the output (12v) - I'd
like
> to use an LED to be on when the door is locked - another use of the
> Comfort output.
> So, anyone recommend a small red led that takes 12v I can plug into a
> spare Comfort output ? I am not an electronics bod by any standard !
(but
> I can do basic electrics!)
Maplin, RS etc have LEDs with a built in resistor for 12V operation.
Eg. RS part 355-6736.
Or you could use a 12V relay, and provide the LED with some other
voltage/resistor combo. The latter may be required if the total of all
the LEDs exceeds the rated current output of comfort (no idea what that
is! LEDs don't take much though).
Jim
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|