[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: Amps with serial interfaces (was Re: AVR300)
- Subject: RE: Amps with serial interfaces (was Re:
AVR300)
- From: "David Claxton" <UKHA@xxxxxxxxxxxxxxxxxxxxxxxx>
- Date: Sun, 10 Oct 2004 18:57:25 +0100
In an email a while back, which was replying to some questions I had, Keith
Doxey mentioned a 'KAT5 Whole House Audio Module' which is going to be able
to do all that. I don't know about the timescale/availability though.
He wrote:
"The WHAM is basically several amplifiers (32W RMS per channel) and
electronic volume/tone controls in one neat box that will sit beneath (or
above ) the KAT5 switcher. It will receive all its commands from the
switcher so whatever method you use to control the switcher
(IR/Serial/Web/xPL/xAP) it will pass the appropriate commands to the
WHAM."
I hope you don't mind me quoting you Keith, but maybe someone will read my
email and hold onto there money until your option is available.
-----Original Message-----
From: Patrick Lidstone [mailto:patrick@xxxxxxx]
Sent: 10 October 2004 13:09
To: ukha_d@xxxxxxx
Subject: [ukha_d] Amps with serial interfaces (was Re: AVR300)
OK chaps, all this talk about amps is potentially bad for the wallet.
Any recommendations for a budget/reasonably priced stereo (doesn't
have to be 5:1) amp with serial control interface? Ability to select
the source, set the volume is all that is really required for my HA
audio needs.
Patrick
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|