Re: CTI Meteor Setup

["rb_ziggy" <richard.boreham@xxxxxxxxxxxx>]

Paul (and everyone else)

Thanks for the serial config - 1200 has done the trick.

I'm trying to use ACE too (going to play with XAp too) but for the
moment want to get ACE running.  Could you give me a tip as to what
the right config (caller id format etc) that you are using.  I'm
getting stuff through serial now but ACE does not seem to pick it up
and report it yet so I must have something off still.  (Serial port
is configured in ACE and I can see things on the serial port monitor
but the popup window does not come up yet).

Thanks again

Richard

--- In ukha_d@xxxxxxx, "Paul Gale" <groups@s...> wrote:
> You need to ensure the settings are correct:
>
> 1200 baud, 8 bits, no parity ,1 stop bit
>
> I think you can actually use terminal - I have before IIRC. You'll
see the data coming in when the phone rings or you use the phone
locally.
>
> I use ACE to announce the caller or number with two Meteor's
connected to work and home lines. AT&T Natural Voices TTS announces
through the whole house audio system. Works very well.
>
> Paul.
>
>
> > -----Original Message-----
> > From: mark_harrison_uk2 [mailto:mph@a...]
> > Sent: 20 November 2004 10:40
> > To: ukha_d@xxxxxxx
> > Subject: [ukha_d] Re: CTI Meteor Setup
> >
> >
> >
> > --- In ukha_d@xxxxxxx, "rb_ziggy"
<richard.boreham@n...>
wrote:
> > >
> > > I've just bought a Meteor and I'm having some trouble
getting
it to
> > > work. I bought the hardware only and there were no
installation
> > > instructions - all seemed pretty self evident but I don't
seem
to be
> > > able to get it to work!
> > [...]
> > > When a call comes in nothing happens to the LEDs either.
(Should
> > > I?).  Also I can see nothing coming in on the serial port.
> >
> > I had the same problem.
> >
> > From memory, though I don't claim to understand the technical
details,
> > you need to do something funny to the serial ports. It doesn't
just
> > light up when you plug it into the PC, and simply firing up a
terminal
> > screen isn't good enough either.
> >
> > Suggest you run either the xPL or the xAP meteor plugins and see
if
> > they can make it work.
> >
> > Regards,
> >
> > Mark
> >
> >
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >