The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Help Needed! Serial Communication with BT Revelation CLU




Aha - yes I did not spot that - will give it a go. As far as I know this is
one of 2 in existence - very rare I'm afraid. Will dig out the supplier for
you but it's the only one he has ever seen.


Chris
----- Original Message -----
From: Nigel Giddings<mailto:nigel@xxxxxxx>
To: ukha_d@xxxxxxx<mailto:ukha_d@xxxxxxx>
Sent: 05 November 2004 18:22
Subject: RE: [ukha_d] Help Needed! Serial Communication with BT Revelation
CLU


Chris,

I take it you are talking about the V24 module.

Have you enabled it ?

Page 28 of the manual describes.

enter programing, dial 70
dial admin code 99
dial option 1 (Print out all calls as they are completed)

Can I ask where you got the V24 module. I have a Revelation and wanted to
fit one of these...

Nigel

-----Original Message-----
From: christopher purves [mailto:CHRIS_PURVES@xxxxxxx]
Sent: 05 November 2004 14:46
To: ukha_d@xxxxxxx
Subject: [ukha_d] Help Needed! Serial Communication with BT Revelation
CLU



Hi Guys,

I wonder if any of you can offer some advice on the following problem.

I have a BT revelation in which I have installed a call logger unit. The
CLU
has a serial (male) 9 pin output. The BT manual quotes 1200 baud 8 bits no
parity but little else in the way of help. I can see a volatge(12v or so)
between pins 2 and 3.

I have so far failed to get anything from the unit. I am assuming I need to
use a null modem cable to attach to pc. I have tried hyperterminal and a
shareware serial port monitor utility but to no avail.

Any ideas anyone ? - I have no idea if it implements handshaking by the
way.

I'm not even sure it its sending anything. Other than the CLU the
revelation
works perfectly.

Chris








UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.