RE: Air quality

["Young, Jeff" <Jeff.Young@xxxxxxxx>]

Do you think this would be any good ?

http://www.smarthome.com/1937.HTML

Jeff

-----Original Message-----
From: Ward, David [mailto:DAvid.Ward@xxxxxxx]=20
Sent: 25 May 2004 13:18
To: 'ukha_d@xxxxxxx'
Subject: RE: [ukha_d] Air quality


AFAIK the way it is done professionally is with filters of varying grades
fitted over filter paper. Air is drawn in through the filters using a
littl=
e
calibrated pump. Results are given by examining the filter paper Not very
automation friendly... though a few automation possibilities exist

Maybe you could try a different approach, similar to the roadside fog or
particulate smoke detector

Fix a light source at one of a tube and a light detector at the other.=20
Shield the whole lot from ambient light, but allow the air with
particulate=
s
to enter the tube The amount of attenuation of the detected light would
giv=
e
an indication of the amount of particulate in the air=20
Of course this would depend on the wavelength of light used, area of cross
section and length of tube

My guess is you'd need a long tube and a sensitive detector, perhaps with a
'reference' detector at the light source end too


I'm sure I've gone off on a tangent again and that somebody will point out
that Laser or similar have an X10/USB device for =A350 that does the job
;-=
)

Still that's the real beauty of this list, diversity and some very clever
people who are generous with their time


HTH

Dave=20
=20=20=20

-----Original Message-----
From: Young, Jeff [mailto:Jeff.Young@xxxxxxx]
Sent: 25 May 2004 13:02
To: 'ukha_d@xxxxxxx'
Subject: [ukha_d] Air quality


Anyone know of a way of monitoring levels of polution in the air?  I live
fairly near a main road and I've been thinking for some time of monitoring
the level of rubbish in the air and possibly providing the results on a web
site.

Thanks in advanced.  Jeff


---------------------------------------------------------------------------=
-
----
The information contained herein is confidential and is intended solely for
the addressee. Access by any other party is unauthorised without the
expres=
s

written permission of the sender. If you are not the intended recipient,
please=20
contact the sender either via the company switchboard on +44 (0)20 7623
8000, or via e-mail return. If you have received this e-mail in error or
wish to read our e-mail disclaimer statement and monitoring policy, please
refer to=20
http://www.drkw.com/disc/email/
or contact the sender. 3166
---------------------------------------------------------------------------=
-
----





=20