RE: Re: Cat5e Patch Panel Wiring.

["Martin" <ukha@xxxxxxxxxxxxxxxxxxx>]

Category 5 Pin Layout
568B / 258A



PIN			COLOUR

1    ----    WHITE/ORANGE
2    ----    ORANGE/WHITE
3    ----    WHITE/GREEN
4    ----    BLUE/WHITE
5    ----    WHITE BLUE
6    ----    GREEN/WHITE
7    ----    WHITE/BROWN
8    ----    BROWN/WHITE


FOR STANDARD 10BaseT and 100BaseTx
ETHERNET PINS 1&2 (PAIR 2) AND 3&6 (PAIR 3) ARE REQ'D
RJ45 Plug Pin 1 is on left hand side with the latch facing down.
HTH
Martin


-----Original Message-----
From:
sentto-1109639-98774-1085347782-ukha=orchardnetworks.com@xxxxxxx.
yahoo.com
[mailto:sentto-1109639-98774-1085347782-ukha=orchardnetworks.com@returns
.groups.yahoo.com] On Behalf Of nick@xxxxxxx
Sent: 23 May 2004 22:30
To: ukha_d@xxxxxxx
Subject: [ukha_d] Re: Cat5e Patch Panel Wiring.

> They should be all numbered on both ends, but Umar's had a few
problems
> recently when his sparky made that assumption :-)

Yes, this latest stuff coupled with Umar's grief and Keith's response
which seemed to crack it........

Pin 1 to Pin 1
Pin 8 to Pin 8

Fine with that.

Now, what's all this about two of the pairs needing to be muddled up in
the middle?

And, IIRC there are two standards (A and B?) which are different.

So, starting with a blank sheet of paper (or more correctly a set of
empty terminals), which is the way to go -- which colours to which
pins??

Cheers,

Nick