The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

RE: [ukha_d] How to spend £5,000


  • Subject: RE: [ukha_d] How to spend £5,000
  • From: "Kevin Hawkins" <lists@xxxxxxxxxxxxxxxxx>
  • Date: Wed, 12 May 2004 21:14:04 +0100

Yes I have & it was OK but my client was fairly high spec too .. 2GHz
1GB
RAM=20

- I havent tried it to a kiosk say but I suspect the worst as the
transmitted stream has to be split from the MUX and decoded. Network
traffi=
c
does cause a noticeable diffenece between client and server versions though
- and reading the BBS's on these the throughput and technical spec/quality
of the network switches you use is critical to this working well. Running a
single stream rather than the complete mux helps.

K

> -----Original Message-----
> From: Mark McCall [mailto:lists@xxxxxxx]=20
> Sent: 11 May 2004 23:15
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] How to spend =A35,000
>=20
> > http://www.nebula-electronics.com/
>=20
> Thanks Kevin.
>=20
> Have you tried streaming over the LAN?  The minimum spec=20
> for the machine with the card is quite high, I'm wondering=20
> if the same spec is required on the client machine?
>=20
> M.
=20




UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.