Re: CCTV capture on Kiosk PC

[Dave McLaughlin <dave@xxxxxxxxxxxxxxxxxxxxx>]

Hi Darryl,

Thanks for the kind offer. I would certainly be happy to give feedback
on it. Does it use the same chipset as the Trust card? It certainly
comes in at a lower price for the card itself?

I would certainly like to give it a try but it depends on the time
scales. I am heading away overseas for a week or two on Sunday (and will
miss UKHA again)  and I wanted to get this setup before I left.

I'll give you my details anyway just in case you can get it here in time?!!

Dave McLaughlin
12 Drumsinnie Drive
Rothienorman
Aberdeenshire
AB51 8YZ

On another note, I was checking out the products on your website and I
see you sell the X10 filter. I have a small problem with the kids PC in
that a couple of the lamps (appliance modules) in the living room do not
always respond when the PC is switched on. With the PC off, they work
fine. I have replaced the PSU in the PC to no avail. I have even tried
switching the monitor off and it still fails. This confirms the PC in my
mind. At present I need something to get back the WAF that I have since
lost.

Will the filter you sell work well in this situation? I also note that
it is out of stock. Would you be able to send me one this week if I
placed an order tomorrow?

Regards
Dave...

Darryl Mattocks wrote:

> Hi Dave.
>
> If our boards *ever* clear customs we have a Harmony based solution
> that we
> are looking for beta testers for.  If your interested, send me your
> details
> and I'll get you a free card and copy of the software in exchange for
some
> useful feedback once HM C&E cough up, hopefully later this week.
>
> Regards
> Darryl
>
> Company X
>
> -----Original Message-----
> From: Dave McLaughlin [mailto:dave@xxxxxxx]
> Sent: 11 May 2004 22:19
> To: ukha_d@xxxxxxx
> Subject: [ukha_d] CCTV capture on Kiosk PC
>
> Can anyone recommend any software that will run on the 433 Celeron
based
> Kiosk PC to capture CCTV images?
>
> I have a Trust PCI 4 input capture card installed and using either
their
> own software or the Cam Surveillance software, it hangs up after a
short
> while. The PC still responds, but the capture software does not
respond
> and I need to shut it down with task manager.
>
> I am not sure if it is a speed problem or possibly hardware related
but
> the card works fine in my main PC with either of the above software.
>
> I only intend to capture 2 cameras at most. I could easily work with 1
> if that is all that will work.
>
> Any help appreciated as ever.
>
> Dave...