RE: Morex external PSUs

["Phil Harris" <phil@xxxxxxxxxxx>]

That sounds easy enough... ;-)

Phil

> -----Original Message-----
> From: Dave McLaughlin [mailto:dave@xxxxxxx]
> Sent: 03 May 2004 23:58
> To: ukha_d@xxxxxxx
> Subject: Re: [ukha_d] Morex external PSUs
>
> Thinking about it again Phil,
>
> What I also was trying to imply, was that you can keep the
> original PSU and use a FAN speed controller on it. Some
> modification is required, but if you can handle a soldering
> iron then it is not too hard to achieve and will work out
> considerable less than a Morex PSU. Just my 2p worth.
>
> Most of the fan speed controllers have an input and an
> output. The FAN in the power supply has a plug in connection
> to the PCB which can be removed. You can then cut the wire in
> half, and then solder in the FAN speed controller inline and
> put the connector back into the PCB. I brought the wires out
> through the rear of the case through one of the vent holes.
>
> Hope this sounds easy??
>
> Dave...
>
> Phil Harris wrote:
>
> >
> > There you go again Dave...
> >
> > ...it's a bit like someone coming on here and saying "It's
> simple if
> > you have an atomic particle accelerator out in the back
garden." ;-)
> >
> > Phil
>
>
>
>
> ------------------------ Yahoo! Groups Sponsor
> ---------------------~-->
> Buy Ink Cartridges or Refill Kits for your HP, Epson, Canon or Lexmark
> Printer at MyInks.com.  Free s/h on orders $50 or more to the
> US & Canada.
> http://www.c1tracking.com/l.asp?cid=5511
> http://us.click.yahoo.com/mOAaAA/3exGAA/qnsNAA/IBOolB/TM
> --------------------------------------------------------------
> -------~->
>
> UK Home Automation Meet 2004 - THIS MONTH!
> http://www.ukha2004.com
>
> http://www.automatedhome.co.uk
>
> Member Offers - http://www.freeranger.co.uk/ukha
> Yahoo! Groups Links
>
>
>
>
>