The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [OT] Wiring up a radar detector



>From my brother the ace Mercedes mechanic (English not so hot!)

take out the cig tray and use the wires off the plug, pull the panel where
the window switches are and there is two screws holding the ash tray in ,
that them out and pull it up. the plug is on the back....

HTH

Tim.

----- Original Message -----
From: White, Peter
To: ukha_d@xxxxxxx
Sent: Saturday, March 20, 2004 5:23 PM
Subject: [ukha_d] [OT] Wiring up a radar detector


Long shot this, but the Merc forums are all US-based and not always very
helpful - I've got a Roadpilot which I've fitted on the right-hand side of
the dash.  It's got a power lead to the cigar lighter, but I've lopped that
off in the hope of finding a hard-wired solution.  However, every wire I
try
is live, ignition on or not.  Wasn't like that in my TT.  I'm guessing that
the newer Mercs run power around the car, and have local modules to control
what's on and off.  Anyone got any experience of this?  I'd rather not have
to take up the carpets or pull the dash apart to find some power.  It's a
2003 CLK cab if that makes a difference.

Thanks

______________________________________________
Pete


[Non-text portions of this message have been removed]



UK Home Automation Meet 2004 - BOOK NOW!
http://www.ukha2004.com

http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx



Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.