RE: [OT] Buildng a concrete base

["Paul Gale" <groups@xxxxxxxxxxxxxxxx>]

Thanks Mark/Tim.

Tim - I'm not sure where to get the shuttering - where did you get yours
and what type was it?

My base is very close to my drive luckily although there is a 8ft fence
in the way - how high can they pour from?

-----Original Message-----
From: Tim Fletcher [mailto:timfletcher@xxxxxxx]
Sent: 09 March 2004 09:56
To: ukha_d@xxxxxxx
Subject: Re: [ukha_d] [OT] Buildng a concrete base

I just built a 10x8 base for the same purpose.  I found useful info on
www.ablemix.co.uk and a few of the other national concrete suppliers.
In the end when it came to pouring the base I went with a local supplier
who promised smaller lorries for easier access.  This was true and
although 7.5 tonnes isn't really a small truck it did allow for easier
access.  I also took a lot of care when I made the shuttering to ensure
it was square and level and screwed the gravel boards to posts driven in
- this allowed easy levelling and made the whole thing rigid prior to
the concrete pour.  The concrete pour was a cakewalk.

There was a tiny mishap as the bloke driving the truck parked it on the
lawn (all 6 wheels) after some pretty heavy rain and was then amazed
that it was stuck - Need less to say it made a mess of te hplace I will
try and dig out a picture of the whole "amusing" incident.

Good luck,

Tim.



[Non-text portions of this message have been removed]



UK Home Automation Meet 2004 - BOOK NOW!
http://www.ukha2004.com

http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx