[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: FW: RS232 Help
Rob try swapping the connections on pins 2 + 3 (db9) tx and
rx.............
Frank
----- Original Message -----
From: "Rob Mouser" <groups@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Monday, June 21, 2004 3:58 AM
Subject: [ukha_d] FW: RS232 Help
Hi I'm a little outa my depth here! So my apologies :-) I want to check the
exact output of my Xantech IR to RS232 box. Am I right in thinking that if
I
connect the output port on the Xantech unit to the serial port on my PC
using a null modem cable. Configure Hyperterminal to the correct settings
and I should be able to see its output?????
Well if all that above is right then sumin is wrong caus I'm seeing nothing
:-(
Rob
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.707 / Virus Database: 463 - Release Date: 15/06/2004
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.707 / Virus Database: 463 - Release Date: 15/06/2004
[Non-text portions of this message have been removed]
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|