[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: Fuji 510
I have just received the IDE to 2.5 HDD adaptor and the connector at the
2.5
HDD is totally different, it is considerably thinner and longer do I need a
further adaptor?
Steve
-----Original Message-----
From: UKHA [mailto:mailinglists@xxxxxxx]
Sent: 04 June 2004 22:31
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] Fuji 510
Below...
-----Original Message-----
From: Steve Nye [mailto:steve@xxxxxxx]
Sent: 04 June 2004 21:52
To: ukha_d@xxxxxxx
Subject: [ukha_d] Fuji 510
I've just got one of these and I have a few questions.
1. I have enabled my Infrared port and the two computers can see each
other - when I try to send to the Fuji it says it can't because it is
actively refused by the other computer (FUJI), how cann I resolve?
Are you using the loaded Transx software? It sorts most of this stuff
out
by itself.
2. How can I back up the operating system or reload a new one?
Remove the hard drive, but a 2.5" to 3.5" converter lead from
Maplins,
and
plug it into your desktop, use Ghost/DiskImage to back it up. If you want
to
install 95/98/etc, copy the install CD to a folder on the hard drive and
run
setup from there.
3. I want to add a wireless lan card is this straight forward?
Yes it is, but getting the drivers onto PC with no external
floppy/cd/ethernet means you have to do 2) above.
Many thanks
Steve
[Non-text portions of this message have been removed]
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|