[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: Multi-output amp
- Subject: RE: Multi-output amp
- From: "Hawes,Timothy Edward \(GEG\)" <haweste@xxxxxxxxxxxxxxx>
- Date: Thu, 8 Jul 2004 06:30:32 +0100
This sounds really good Dave, keep us posted :-)
Cheers,
Tim H.
> -----Original Message-----
> From: Dave McLaughlin Sent: 08 July 2004 00:48
>
> Thanks for the info Paul.
>
> What I might try is to build my own 4 zone amp and control
> system. I have an empty 19" rack chassis and I thought about
> building a eurocard based design. As you need more zones, you
> simply plug in a new board (up to 10 as this is what the
> supply I plan to use can handle) Each zone is only 15W per
> channel and more than enough for what I want to use it for.
>
> The control is via CAN bus but can easily be xAP, xPL etc as
> I will add in an Ethernet and an RS485 interface for other
> bods!!! You can have up to 4 switchable inputs to each amp
> module and each room can be different with separate volume
> control etc. You could probably buy this, but I prefer the
> challenge of a do it yourself!!! :o)
>
> I'll feedback on how I get on. First zone should be in test
> next week with some parts from CPC/Maplin/Rapid etc.
>
> Regards
> Dave...
+
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|