[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Re: DIY Data Wallplate
- To: <ukha_d@xxxxxxx>
- Subject: RE: Re: DIY Data Wallplate
- From: "Des Gibbons" <des@xxxxxxx>
- Date: Wed, 28 Jan 2004 10:24:02 -0000
- Mailing-list: list ukha_d@yahoogroups.com; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
> -----Original Message-----
> From: Mal Lansell [mailto:mlansell@xxxxxxx]
>
> Thats two votes for a Dremmel. After reading Alistair's post, I
> had a look
> at their site and was thinking along the lines of the scrolling saw,
but I
> guess the cutting disk would work, and I'd have some other uses
> for a rotary
> tool anyway...
I did notice that B&Q are doing a cheap scroll saw for £29.99 if that
makes
any difference to your decision.
If you do it with a scroll saw or a dremel, it will be difficult and
require
lots of practice to get right I would imagine.
And make sure you take some pics so we can see the end result, whichever
way
you do them :)
Cheers, Des.
UK Home Automation Meet 2004 - BOOK NOW!
http://www.ukha2004.com
http://www.automatedhome.co.uk
Post message: ukha_d@yahoogroups.com
Subscribe: ukha_d-subscribe@yahoogroups.com
Unsubscribe: ukha_d-unsubscribe@yahoogroups.com
List owner: ukha_d-owner@yahoogroups.com
Home |
Main Index |
Thread Index
|