RE: Re: Automating a combi boiler

["Brian G. Reynolds" <brian.g.reynolds@xxxxxxx>]

Ah just found out it is made by Glow-Worm.

Can not find it on their site....the links that work that is....

B.

-----Original Message-----
From: Brian G. Reynolds
Sent: 18 January 2004 01:48
To: ukha_d@yahoogroups.com
Subject: RE: [ukha_d] Re: Automating a combi boiler


The make is:-
Protherm 100EC.

That is all it says on the instruction manual but I suspect this is not the
manufacturer?

I have googled but no joy...

I will see what else I can find...

B.

-----Original Message-----
From: Dave McLaughlin [mailto:dave@xxxxxxx]
Sent: 18 January 2004 01:16
To: ukha_d@yahoogroups.com
Subject: Re: [ukha_d] Re: Automating a combi boiler


Hi Brian

Who makes the boiler and maybe I can dig something out.

It does kind of indicate that the link shorts out the place where the
thermostat would be fitted. Your only concern to watch is that most of
these boiler control systems are mains rated so make sure the relay you
use is suitably rated too.

Dave...

---
Very funny Scotty, now beam down my clothes...!!
---
http://www.v8carlton.com
http://www.embeddedcomputer.co.uk
---


Brian G. Reynolds wrote:

> Afraid not...
>
> All I have is a printed document, a schematic diagram.
>
> This shows a "chock-block" labelled "room
thermostat" and it is this
> that has the link.
>
> Then on another page there is a line drawing showing the boiler with
> an arrow pointing to the rough location of the chock-block, but there
> are also lines representing the mains cable and a cable marked
> "externals controls lead (not supplied)" so this leads me to
thinking
> they are different connections.
>
> I suppose I could contact the manufactures?
>
> Thanks again,
>
> B.


UK Home Automation Meet 2004 - BOOK NOW!
http://www.ukha2004.com

http://www.automatedhome.co.uk
Post message: ukha_d@yahoogroups.com
Subscribe:  ukha_d-subscribe@yahoogroups.com
Unsubscribe:  ukha_d-unsubscribe@yahoogroups.com
List owner:  ukha_d-owner@yahoogroups.com