The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: High Resolution Security Cameras



The video out I was referring to was like the one on my Canon A40.  The
video out that just seems to divert the LCD image to a composite out,  when
in normal picture taking mode the low res image that the LCD usually
displays just pops out on the Telly :-)
Granted the shutter delay may be a problem - esp. if auto focus is
activated,
as always Steve's digicams is great for this kind of info

Dave

-----Original Message-----
From: Andy Laurence [mailto:andy@xxxxxxx]
Sent: 25 February 2004 10:00
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] High Resolution Security Cameras


From: Ward, David [mailto:David.Ward@xxxxxxx]
> A while back I downloaded the FREE SDK that Canon provide to enable
control
> of their digital cameras.  I'm sure there was an example app that did
motion
> detection.  I was planning the same thing that you've suggested -

http://ptp.sf.net is the standard
interface for many digital cameras these
days.

>  Of course like all these things my interest went over to another
project,
> and it seems I've lost my Round-toit :-S

Heh!  Me too.

> I don't think the Canon drivers allowed for multiple cameras connected
to
> the same host though.  So either external switching or multiple PC
hosts
> would be required.

Hmmm.  I suppose it depends on the spec required.  If a simple P200 will
suffice, then it's cheap to place a server by each camera.  Space would be
the issue.  There's always VMware and running all the cameras back to
node0.

> I wonder if any of the other manf. have SDKs available?

Not sure, but most cameras support some form of remote capture.

> One thing I did think of, was to use the video out that's available on
99%
> of digital cameras these days plug that into a PC running motion
detection
> software, then trigger the camera using either an external circuit
(remote
> release socket or hardware hack) or via the USB connection

Good idea, but many of the cameras won't release the shutter when the
analogue out is on.  I suppose the answer would be to hook a PIC up to the
buttons on the camera, and trigger it via a serial command to switch to
camera mode and take a photo.  Of course, this could take 10 seconds with
slower cameras, by which time the subject will probably have moved.  Also,
you'd need to switch modes, then take a photo, and then bring the image
back.  You'd need a serial, data (serial or USB), and video line.  Shame
you
can't do motion detection on a PIC ;-)

> Anyone have any more thoughts?

Nothing concrete as yet.  Also, I'm not sure if any cameras support capture
of images directly back to the PC.  Transfer times will also be an issue.

Cheers,
Andy
--
http://ha.andylaurence.co.uk



UK Home Automation Meet 2004 - BOOK NOW!
http://www.ukha2004.com

http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.