The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: LD11 Loadings



Will the LD11 like a toroidal transformer? I would have thought 2 x 120W
(for some headroom) would be better.

Jon

----- Original Message -----
From: "Gareth Cook" <g@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Monday, February 16, 2004 9:51 AM
Subject: Fw: [ukha_d] LD11 Loadings


> Ok, so If I had 10x20w downlights, I could hang these off of a single
200w
> toroidal transformer. So I should use 2.5mm rather than 1.5mm for the
loop
> between the transformer and the lights ? And then standard 1.5mm from
the
> transformer to the LD11 ?
>
> The room is about 5x4metres so distances between the single
transformer
> and the 10 lights should be that great.
>
> G.
>
>  Gareth Cook
>  SWG EMEA North Account Manager
>  IBM SWG - BTE Office - Lotus Park, Staines, TW18 3AG
>  Office: +44 (0)1784 445166 - Mobile: +44 (0)7980 445166
>  AIM Chat : TheBoyG - MSN Chat : chat@xxxxxxx
>  email: g@xxxxxxx
>
>
> ----- Forwarded by Gareth Cook/UK/IBM on 16/02/2004 09:50 -----
>
> Discussion
> Main Topic
>
> "Dean Smith" <dean@xxxxxxx>
> Today 09:37
>
> .
> Subject:
> .
> RE: [ukha_d] LD11 Loadings
> .
> Category:
>
>
>
> If the LD11 is going in a Local consumer unit - some have multiple
Copper
> busses - so you could use these for Distribution of the switched 240V
to
> multiple Transformers ?
>
> I have 5x35Watt downlighters in the bedroom and used a single LD11 to
a
> single Transformer. Then had a single 2.5mm T&E to a 30Amp
junction box
> for
> the 12V and then split the 12V out from there to the downlighters via
> individual 1mm T&E. Standard round junction box coped happily with
6
> cables
> in each screw terminal.
>
> Deano
>
>
> -----Original Message-----
> From: Gareth Cook [mailto:g@xxxxxxx]
> Sent: 16 February 2004 09:24
> To: ukha_d@xxxxxxx
> Subject: [ukha_d] LD11 Loadings
>
>
> I want to put in 10 20watt 12v downlighters in my Games Room. So my
> question is, can I hang this lot ok from a single LD11 and therefore
one
> momentary switch ?
>
> The other challenge here is how to get from 10 T&E cables down to
a single
> one to connect to the LD11 - anyone got any bright ideas ? (other than
a
> cascading joining system !)
>
> Ta
>
> G.
>
>  Gareth Cook
>  SWG EMEA North Account Manager
>  IBM SWG - BTE Office - Lotus Park, Staines, TW18 3AG
>  Office: +44 (0)1784 445166 - Mobile: +44 (0)7980 445166
>  AIM Chat : TheBoyG - MSN Chat : chat@xxxxxxx
>  email: g@xxxxxxx
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
> UK Home Automation Meet 2004 - BOOK NOW!
> http://www.ukha2004.com
>
> http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
> Yahoo! Groups Links
>
>
>
>
>
>
>
> UK Home Automation Meet 2004 - BOOK NOW!
> http://www.ukha2004.com
>
> http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
> Yahoo! Groups Links
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
> UK Home Automation Meet 2004 - BOOK NOW!
> http://www.ukha2004.com
>
> http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
> Yahoo! Groups Links
>
>
>
>
>



UK Home Automation Meet 2004 - BOOK NOW!
http://www.ukha2004.com

http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.