The UK Home Automation Archive

Archive Home

Group Home

Search Archive
Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Phone not ringing (via cat5e and patch panel)

To: <ukha_d@xxxxxxxxxxxxxxx>
Subject: RE: Phone not ringing (via cat5e and patch panel)
From: "Andy Laurence" <andy@xxxxxxxxxxxxxxxxxx>
Date: Wed, 11 Feb 2004 16:38:55 -0000
Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
Reply-to: ukha_d@xxxxxxxxxxxxxxx

From: php_code_monkey [mailto:php_code_monkey@xxxxxxx]
> I just don't get why it's not ringing.  It's the only phone connected,
> REN 1, and the cable runs are like 10m each, it's very close to the BT
> wall outlet.

Sounds to me like one of your pairs is a bit broken somewhere along the
line.  One pair carries your voice (including the dial tone), and the other
pair activates the ringer.  What pins are you using for the adapters you've
made?

Cheers,
Andy
--
http://ha.andylaurence.co.uk

Prev by Date: Phone not ringing (via cat5e and patch panel)
Next by Date: X10 Curtain Control
Previous by thread: Re: Phone not ringing (via cat5e and patch panel)
Next by thread: Re: Phone not ringing (via cat5e and patch panel)
Index(es):
- Date
- Thread

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.