The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: C-Bus install questions



> There is a DIN Rail mounter module that can be used for this instead
thou=
gh
> which I'll try and find for you.

OK..it's the - L5504AUX Series C-Bus Four Channel Auxiliary Switch Input,
D=
IN Rail Series

. Provides four channels to facilitate remote access
to C-Bus via any dry contact switch mechanism

. Remote switches are electrically isolated from
C-Bus by the use of transformers on each channel
input located on the unit

. Accepts a wide variety of cable types and sizes up
to 2.5mm=B2 stranded cable

. Maximum switch plus cable resistance is 1000 ohms

. Incorporates four status indicators, one per channel

. Draws 18mA from the C-Bus Network



[Non-text portions of this message have been removed]



UK Home Automation Meet 2004 - BOOK NOW!
http://www.ukha2004.com

http://www.automatedhome.co.uk=20
Post message: ukha_d@xxxxxxx=20
Subscribe:  ukha_d-subscribe@xxxxxxx=20
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx=20
List owner:  ukha_d-owner@xxxxxxx=20

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.