[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Terminate in Wall Speaker cables
- To: <ukha_d@xxxxxxx>
- Subject: RE: Terminate in Wall Speaker cables
- From: "Hawes,Timothy Edward (GEG)" <haweste@xxxxxxx>
- Date: Tue, 3 Feb 2004 07:53:12 -0000
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Mark,
I made my own plates up, these have a combination of speaker sockets, F
sockets etc.
I followed James Hoye's tutorial, see:
http://www.home-automation.info/
then click "Sitting Room" form the LHS menu, in the second para
under the picture click the HOWTO link.
If you use smaller banana sockets you can get 6 pairs onto a double-gang
plate.
Alternatively, I'm pretty sure www.letsautomate.com does them, not sure
about 12-way though.
HTH,
Tim H.
> -----Original Message-----
> From: mark90h Sent: 03 February 2004 01:09
>
> Hi,
> I want to terminate my in wall speaker cables for 2 pairs of
> speakers + 1 bi-wired (12 wires total). Is it best to terminate
> these in a gang box with a speaker socket face plate (ideally all 12
> in a double gang box) and if so can you recomend a supplier?
>
> Thanks,
> Mark
+
UK Home Automation Meet 2004 - BOOK NOW!
http://www.ukha2004.com
http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Home |
Main Index |
Thread Index
|