The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: CBus Socket depth



>Why not just go for 48mm deep back boxes?
>As far as I'm aware, they're the deepest that are (readily) available.

The problem is that I'm trying to minimise the depth. The internal wall
construction goes something like

19mm batten : Tyvek Membrane : 160mm stud with insulation : Vapour membrane
: XXX batten : 9.5 mm plasterboard

This makes the total wall depth 188.5mm plus the batten for the service
void
(where the back boxes will go). I would like to use another 19mm batten,
giving a total depth of 28.5mm for the back box. Worst case I can make
holes
into the insulation, but I would need to make sure that the   vapour
membrane is full sealed around it, not too difficult but a pain in the but.




The Royal Bank of Scotland plc, Registered in Scotland No. 90312.
Registered Office: 36 St Andrew Square, Edinburgh EH2 2YB

The Royal Bank of Scotland plc is authorised and regulated by the Financial
Services Authority and represents The Royal Bank of Scotland Marketing
Group. The Bank sells life policies, collective investment schemes and
pension products and advises only on the Marketing Group's range of these
products and on a With-Profit Bond produced by Norwich Union Life (RBS)
Limited.

This e-mail message is confidential and for use by the addressee only. If
the message is received by anyone other than the addressee, please return
the message to the sender by replying to it and then delete the message
from your computer. Internet e-mails are not necessarily secure. The Royal
Bank of Scotland plc does not accept responsibility for changes made to
this message after it was sent.

Whilst all reasonable care has been taken to avoid the transmission of
viruses, it is the responsibility of the recipient to ensure that the
onward transmission, opening or use of this message and any attachments
will not adversely affect its systems or data. No responsibility is
accepted by The Royal Bank of Scotland plc in this regard and the recipient
should carry out such virus and other checks as it considers appropriate.


UK Home Automation Meet 2004 - BOOK NOW!
http://www.ukha2004.com

http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx


Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.