The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

RE: Pump me hard!


  • Subject: RE: Pump me hard!
  • From: "Phil Harris" <phil@xxxxxxxxxxx>
  • Date: Fri, 31 Dec 2004 21:48:18 -0000




> -----Original Message-----
> From: Paul Gordon [mailto:paul@xxxxxxx]
> Sent: 31 December 2004 20:09
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] Pump me hard!
>
>
> Hey Phil,
>
> The one we use, Wendy inflates with a hairdryer (on a cold
> air setting) in about 3 minutes flat with no effort whatsoever.
>
> The hairdryer nozzle doesn't even need to be sealed up to the
> bed inlet valve, which is a large diameter one, designed for
> filling by a hairdryer, - not one of those tiny "nipple"
> types where you have to squeeze the base whilst blowing for
> all your worth by mouth...
> (Something which you will be quite familiar with anyway no doubt... )
> ;-)
>
> What type of vales do you have on your inflatables?....

On the matresses there are both "nipple" valves and the bigger
round ones
with a rubber bung and a screw on cap ... Those bigger ones are bloody
annoying as you can never get the bung in without losing a lot of air. (Or
maybe I'm just inflating them too hard?)

Never thought of trying the hairdryer.

Phil




UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.