Re: CM11 - how to clear the memory ??

["K. C. Li" <li@xxxxxxxxx>]

On Mon, 27 Dec 2004, egelbeertje wrote:

> Been fiddling with it over the weekend and suddenly got
"Insufficient
> Memory in the Interface" error. Can't get it cleared and can't
upload
> new timers.

ActiveHome appears to set the default dawn and dusk resolution rather high
at 50. That parameter controls the pairs of dawn and dusk times calculated
based on the longitude and latitude set. The generated values are then
preloaded into the CM12U to account for the sunrise/sunset variation
throughout the year. They occupy the same 1kB EEPROM space as timers and
macros so the more dusk/dawn pairs, the less for everything else. A
suggested value of 12 or less should be sufficient for most needs.

To change the number of dusk and dawn values generated, do the following:

Select menu options
Tools -> Statistics -> Resolution

Then change the Timer Resolution to a smaller number and press
"OK".

The Statistics screen shows the number, day range and times of dusk/dawn
pairs generated.

> All advise welcome (obiously I already left it unplugged overnight
> without batteries but to no avail.)

The CM12U's EEPROM memory can also be cleared by the following:

Tools -> Clear Interface Memory

Merry Christmas and a Happy New Year!

Regards,

Kwong Li
li@xxxxxxx
Laser Business Systems Ltd.
http://www.laser.com
http://www.cbus-shop.com