RE: TV aerials

["Keith Doxey" <ukha@xxxxxxxxxxx>]

Hi Lee,

If you will be using the UHF output from them you need to daisy chain them
because you cant mix the two outputs together. Just make sure the UHF
channels chosen are differnet and do not conflict with anything else.

If you are using the SCART outputs then you wont need the UHF outputs so
just get a 4 set amplifier and feed the incoming aerial into that. Use two
of the outputs for yor freeview boxes and the others for driving the main
UHF distribution.

Regards

Keith

> -----Original Message-----
> From: UKHA [mailto:mailinglists@xxxxxxx]
> Sent: 25 August 2004 08:59
> To: ukha_d@xxxxxxx
> Subject: [ukha_d] TV aerials
>
>
> I'm adding another FreeView box to my AV stack, I've tried using
> a splitter
> to share the aerial between the two boxes, but the signal is just
slightly
> too weak, the pictures pixelates for a second every min of so.
>
> Therefore, what would be best -
>
> a) Replace existing aerial with a bigger one?
>    If so how big/what type?
>
> b) Fit a second aerial (with the eyesore, cabling, drilling, etc)
> which will
> (?) work?
>    If so, how far apart should they be (I have vague recollections of
> problems if too close together)?
>
>
> Lee
>