The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

RE: SW10G help required


  • Subject: RE: SW10G help required
  • From: "Phil Harris" <phil@xxxxxxxxxxx>
  • Date: Wed, 11 Aug 2004 19:51:04 +0100


Wind the screen all the way down, then put the unit in program mode and
program it for the *UP* time - that's how I did mine. For the screen travel
down limit you *MUST* use the screens own stops - the SW10G is not
second-accurate.

Phil

> -----Original Message-----
> From: big_red_frog [mailto:anthony.tod@xxxxxxx]
> Sent: 11 August 2004 19:21
> To: ukha_d@xxxxxxx
> Subject: [ukha_d] SW10G help required
>
> Hi All,
>
> I must be having a dull day...
>
> I am having desperate trouble with an SW10G I have just recieved.
>
> I am using this to control my projector screen.
>
> It is correctly wired up to give up and down control as you
> would expect and one touch start, stop, and hold in control
> works fine.
>
> However, I can't seem to program the automatic open and close
> time correctly.
>
> The instructions are written for window blind use, and they
> are none too clear or dependable!
>
> As far as I can see I have to start with the projector screen
> closed, as in fully rolled up.
>
> Switch to teach mode by placing the house code to *
>
> Then press the down button once. When the screen is at the
> desired height, press the down button again and the screen stops.
>
> Then switch to the desired house code and everything should be OK.
>
> I assume that to close the screen it just runs this time + a
> bit to allow it to hit the stops, as you can't guarantee that
> the open and close speed are the same.
>
> Anyway, my problem is that it just doesn't seem to care what
> I attempt to program as the screen open time, when I send it
> X10 commands, it just runs on until the screen hits the
> physical open stop.
>
> Any ideas guys, anyone else used one of these and can tell me
> what the obvious thing I have missed is please?
>
> Yours in desperation...
>
>
>
> ------------------------ Yahoo! Groups Sponsor
> --------------------~--> Make a clean sweep of pop-up ads.
> Yahoo! Companion Toolbar.
> Now with Pop-Up Blocker. Get it for free!
> http://us.click.yahoo.com/L5YrjA/eSIIAA/yQLSAA/IBOolB/TM
> --------------------------------------------------------------
> ------~->
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>




UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.