RE: Re: Line-level audio distribution

["mike" <mikegriff@xxxxxxxxxx>]

Sorry picked up the wrong one  from the site

Phil has already replied with the right one

Mike



_____

From: yhkeppy [mailto:keith@xxxxxxx]
Sent: 20 April 2004 12:35
To: ukha_d@xxxxxxx
Subject: [ukha_d] Re: Line-level audio distribution



I might be wrong, but this switches 6 inputs to 1 output, whereas I
want to distribute 1 input to 6 outputs.

Philex's site doesn't appear to be working, so can't check the tech
specs.

Keith

--- In ukha_d@xxxxxxx, "mike" <mikegriff@e...> wrote:
> http://www.letsautomate.com/10610.cfm?
>
> Won't this give you 6 unbalanced audio outputs for a lot less
>
> With Video as a bonus :-)
>
> Mike
>
>   _____
>
> From: yhkeppy [mailto:keith@f...]
> Sent: 20 April 2004 09:53
> To: ukha_d@xxxxxxx
> Subject: [ukha_d] Re: Line-level audio distribution
>
>
>
> David,
>
> Spot on - that's exactly what i'm after!! The RU-UDA4 is exactly
> right (though i'd prefer 6 outputs....).
>
> I'll start hunting for the Maplin module - I had started to look
for
> one of these modules, but was not having much luck. I'd prefer to
do
> it this way due to cost.
>
> Cheers,
>
> Keith
>
>
>
> --- In ukha_d@xxxxxxx, "David Buckley" <db@e...>
wrote:
> > --- In ukha_d@xxxxxxx, "yhkeppy" <keith@f...>
wrote:
> > > ...  I've got twin screened cable running from node 0 to
lots
> > > of locations (as well as the omnipresent cat5e) and want to
> > > use this. Basically each room is cabled back and presented
> > > on custom panels of paired RCA sockets. I then want to patch
> > > these out to one of two 'zones', where a zone is a device
> > > that accepts one line-level audio input and outputs that
> > > signal 8 times (i.e. a distributor).
> >
> > Ahhhh, you want an unbalanced distribution amplifier.
> >
> > My old house was wired just like that; I stuck twin screened
cable
> > in (along with the leakiest TV coax known to man) in 1985 when I
> did
> > the Big Rewire.
> >
> > What you need is one or more of these:
> >
> > http://www.rdlnet.com/ru-uda4.htm
> >
> > You can even get them in the UK now:
> >
> > http://www.canford.co.uk/commerce/item_58-435_2001227.aspx
> >
> > Though that price looks a little excessive.  I got mine from
> > the 'states directly, it was several years ago.  BTW, they are
> > specified for 24v but will run perectly well on 12v, I just used
a
> > stsandard wallwart.
> >
> > Kramer (amongst others) also do these, Composite Video will have
> > them, http://www.compositevideo.co.uk
but you actually have to
talk
> > to these people - the website is not helpful, other than
providing
> a
> > phone number.
> >
> > Of course, they are a ripoff; all you need is a line level buffer
> > with a low impedence output, and feed each outgoing coax via a
220R
> > resistor.  Maplins used to do such a module, intended for the
> output
> > stage of a mixer, but a quick look on the website and I couldnt
> find
> > it.
> >
> > David.
>
>
>
> UK Home Automation Meet 2004 - BOOK NOW!
> http://www.ukha2004.com
>
> http://www.automatedhome.co.uk
>
> Member Offers - http://www.freeranger.co.uk/ukha
>
>
>
>
>   _____
>
> Yahoo! Groups Links
>
> *         To visit your group on the web, go to:
> http://groups.yahoo.com/group/ukha_d/
>
>
> *         To unsubscribe from this group, send an email to:
> ukha_d-unsubscribe@xxxxxxx
> <mailto:ukha_d-unsubscribe@xxxxxxx?subject=Unsubscribe>
>
>
> *         Your use of Yahoo! Groups is subject to the Yahoo! Terms
of
> <http://docs.yahoo.com/info/terms/>
 Service.
>
>
>
> [Non-text portions of this message have been removed]



UK Home Automation Meet 2004 - BOOK NOW!
http://www.ukha2004.com

http://www.automatedhome.co.uk

Member Offers - http://www.freeranger.co.uk/ukha