RE: Re: Telephone wiring question

["Paul Gale" <groups@xxxxxxxxxxxxxxxx>]

Sorry - gave you duff info :(

I meant to say I chopped off the BT plug and replaced with RJ45.

There are other alternatives though - like getting some of the RJ45 to BT
converters that just plug in. I personally didn't like this option as
they're a little bulky if on show - and cost more than an RJ46 plug! (only
a few quid each I think???)

Paul.



> -----Original Message-----
> From: matt_miles_uk [mailto:m_miles@xxxxxxx]
> Sent: 16 April 2004 09:16
> To: ukha_d@xxxxxxx
> Subject: [ukha_d] Re: Telephone wiring question
>
> Sorry for being silly but does this eman I have to chop off my BT
> plugs (not RJ 11, or 12) and put an RJ12 plug on. (not a problem if
> it does)
>
> Matt
>
> --- In ukha_d@xxxxxxx, "Frank Mc Alinden"
<fmcalind@b...>
> wrote:
> > Matt
> >         The centre 2 pins are normally used for phones even if 
the
> small 4
> > pin rj11..12 type leads ??..........
> > Frank
> > ----- Original Message -----
> > From: "matt_miles_uk" <m_miles@b...>
> > To: <ukha_d@xxxxxxx>
> > Sent: Friday, April 16, 2004 6:02 PM
> > Subject: [ukha_d] Re: Telephone wiring question
> >
> >
> > > So you just wired straight through for all 6 pins?  How do
you
> adapt
> > > your phones at the end points?
> > >
> > > Cheers,
> > >
> > > Matt
> > >
> > > P.S
> > >
> > > Sorry to keep going over what must be old ground or you guys
but I
> > > can't get my head around this!
> > >
> > > --- In ukha_d@xxxxxxx, "Paul Gale"
<groups@s...> wrote:
> > > > I (like some others I think?) simply wired up some
patch panel
> ways
> > > in parallel (all connectors connected). I then brought in
the
> > > incoming phone feed and terminated it into an RJ45 plug and
into
> one
> > > of the patch ways. The outgoing were simply done in the same
way.
> > > Quite simple, you just need to keep track of which phone
cable
> goes
> > > to which RJ45 pin. Makes for a very flexible system if you
have a
> > > patch panel?
> > > >
> > > > Paul.
> > > >
> > > >
> > > >
> > > > > -----Original Message-----
> > > > > From: matt_miles_uk [mailto:m_miles@b...]
> > > > > Sent: 16 April 2004 08:52
> > > > > To: ukha_d@xxxxxxx
> > > > > Subject: [ukha_d] Re: Telephone wiring question
> > > > >
> > > > > Thanks for all your help.
> > > > >
> > > > > I am going to try Dean's suggestion at my mates
house I think
> (if
> > > it
> > > > > goes wrong at least its not my place ;))
> > > > >
> > > > > Frank, is there any chance you could take some
pics of your
> setup
> > > as
> > > > > I am a bit confused.  If you only use 2 wires how
do you get
> each
> > > > > extension to ring?  Do you use an RJ45 - BT master
on each
> outlet?
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > UK Home Automation Meet 2004 - BOOK NOW!
> > > > > http://www.ukha2004.com
> > > > >
> > > > > http://www.automatedhome.co.uk
> > > > >
> > > > > Member Offers - http://www.freeranger.co.uk/ukha
> > > > > Yahoo! Groups Links
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > >
> > >
> > >
> > >
> > > UK Home Automation Meet 2004 - BOOK NOW!
> > > http://www.ukha2004.com
> > >
> > > http://www.automatedhome.co.uk
> > >
> > > Member Offers - http://www.freeranger.co.uk/ukha
> > > Yahoo! Groups Links
> > >
> > >
> > >
> > >
> > >
>
>
>
>
> UK Home Automation Meet 2004 - BOOK NOW!
> http://www.ukha2004.com
>
> http://www.automatedhome.co.uk
>
> Member Offers - http://www.freeranger.co.uk/ukha
> Yahoo! Groups Links
>
>
>
>
>




UK Home Automation Meet 2004 - BOOK NOW!
http://www.ukha2004.com

http://www.automatedhome.co.uk

Member Offers - http://www.freeranger.co.uk/ukha