The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [OT] Gonna buy fast PC - what/who/where?


  • To: ukha_d@xxxxxxx
  • Subject: Re: [OT] Gonna buy fast PC - what/who/where?
  • From: "keyvan2r" <keyvan@xxxxxxx>
  • Date: Thu, 18 Sep 2003 23:42:49 -0000
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

It is an AMI BIOS. I could not get any beeps when not mounted in
mobo. But then there is no speaker to connect to outside the case.
I am pretty convinced it must a faulty one.
There is no way of knowing wihtout a video signal.

A review/spec. of P4C800 is here:

http://www.a1-electronics.net/Intel_Section/Mobos/i875P/ASUS_P4C800-
Deluxe.shtml

It is supposed to be one the best/fastest mobo's around. Shame I
can't get it to work :-(

Oh well, back to drawing board.

Keyvan

--- In ukha_d@xxxxxxx, "Des Gibbons" <des@f...> wrote:
> What BIOS is it?
>
> Also, do you get any POST beeps if you power on with no GFX card?
>
> Cheers, Des.
>
> > -----Original Message-----
> > From: keyvan2r [mailto:keyvan@xxxxxxx...]
> >
> > Tried it all now...
> > Cleared the cmos... still no video signal
> > Took the mobo out of the case, hooked up the Gainward Nvidia
graphic
> > card (known to be working in another pc), put it on a anti-stat
mat
> > and connected the psu. Nothing... The green led comes on and I
can
> > the system to start (very carefully use a screw driver to short
the
> > power on jumper!!)but no video signal or error indicator.
> > Must be a faulty unit.



Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.